Construction Precautions

The power source of the hammer is the pressure oil provided by the pump station of the excavator or loader, which can more effectively clean the floating rock and the mud in the crevices of the rock in excavating the foundation of the building. The principle of selecting the breaker in the operation is based on the excavator model and the operating environment. When construction workers use crusher construction, what problems should construction workers and site personnel pay attention to?

AXB Technology Co., Ltd. warming you do as folllows:

1. Install a debris guard device in front of the cab to prevent damage caused by flying debris during operation;

2. During the operation of the breaker, all on-site personnel including excavator drivers must wear earplugs and masks;

3. The driver should sit on the seat and operate the breaker. Only when the state of the excavator, loader and breaker is normal can the breaker be broken.

4. If someone enters the dangerous area of the operation, the operation of the breaker should be stopped immediately; for the relative excavation operation, when the breaker is operated, the personnel can easily be hit by the flying debris;

5. When working with a breaker, operating the excavator and loader should comply with the safe operating regulations of excavators and loader manufacturers. Make sure to use a properly installed and commissioned breaker.

6. When disassembling and bending back for maintenance and overhaul, ensure that the working conditions are stable and lower the working device.

There is a certain degree of danger in the construction of the breaker. Therefore, other unrelated personnel should be far away from the work area during construction. The operator of the breaker should take safety precautions. Note that the above issues are the prerequisite for ensuring personal safety and the prerequisite for successful construction.